Gravel Pile: A Comprehensive Guide to Composite Ground Improvement
What is a Gravel Pile? Gravel piles (also known as stone columns or aggregate piers) are a type of granular pile used for ground improvement in soft soil foundations. These…
Long Spiral Drilling Pumping Super-Fluid Concrete with Post-Placement Reinforcement Cage Technology
1. Introduction The long spiral drilling pumping super-fluid concrete with post-placement reinforcement cage technology evolved from Japan's CIP (Cast-In-Place) method. Unlike conventional bored piles, this technique involves drilling to the…
Application and Analysis of PC Method Combined Steel Pipe Piles in Foundation Pit Engineering
Abstract For a long time, deep foundation pit support engineering has primarily utilized reinforced concrete and steel structure supports, with reinforced concrete being particularly widespread. However, with advancements in engineering…
High-Pressure Jet Grouting Pile vs. Cement Mixing Pile: Key Differences
When it comes to ground improvement techniques, high-pressure jet grouting piles and cement mixing piles are two commonly used methods. While both involve cement mixing with soil to enhance stability, they differ significantly in working…
Foundation Pit Support Engineering: Types and Selection Guide
What is Foundation Pit Support Engineering? Foundation pit support engineering refers to the structural measures taken during excavation to ensure slope stability, protect underground structures, and prevent damage to surrounding…
MJS Pile Construction Technology: Principles, Process, and Quality Control
Introduction The MJS (Metro Jet System) pile method, also known as the Omni-Directional High-Pressure Jet Grouting technique, has been widely adopted in foundation treatment, seepage control for excavation support walls,…
Construction Process and Technical Requirements for Capping Beam (Guide Beam)
1.1 Construction Process The construction of the capping beam involves several critical steps to ensure structural integrity and compliance with design specifications. 1.2 Material Requirements 1.2.1 Concrete Grade: C30 commercial…
Subgrade Bearing Capacity: Definition, Theory, and Testing Methods
What is Subgrade Bearing Capacity? Subgrade bearing capacity refers to the load-bearing potential of foundation soil per unit area as the load increases, typically measured in kPa. It is a…
Underground Diaphragm Wall Construction Process: Methods and Quality Control
Introduction The underground diaphragm wall is a critical structural element used in deep excavations, tunneling, and foundation engineering. This article details the construction methodology, quality control measures, and inspection techniques…
Common Issues and Solutions in Bored Pile Construction
Introduction During bored pile construction, various issues may arise that require immediate attention from on-site technical personnel. Proper handling and timely reporting to the construction team's chief engineer and manager…
Construction Process Flow Chart for Pile Foundation Work
Section 1: Construction Preparation and Site Leveling Site Preparation Complete "Three Connections and One Leveling" (water, electricity, road access, and site leveling) before excavation. Remove all obstacles such as underground…
9 Major Challenges in Prefabricated Pile Testing and Their Solutions
1. Impact of Low Pulse Frequency or Wave Frequency on Shallow and Pile Impedance Analysis When impedance changes occur in the shallow section of a pile, the reflected waves exhibit…
- 1
- 2
- 3
- 4
- …
- 12
- Go to the next page
